Overview
Create 3D scans with high accuracy for a variety of creative 3D printing and designing applications with the Einscan-SP (Platinum) 3D Scanner with Turntable. In Turntable mode, it can do full scans in less than one minute.
Technical Details
| Scan Mode | Fixed Scan Auto Scan |
| Single Shot Accuracy | ≤ 0.05 mm |
| Scan Speed | Fixed Scan: < 4 seconds Auto Scan: < 1 minute |
| Minimum Scan Volume | 1.2 x 1.2 x 1.2" / 30 x 30 x 30 mm |
| Maximum Scan Volume | Fixed Scan: 47.2 x 47.2 x 47.2" / 1200 x 1200 x 1200 mm Auto Scan: 7.9 x 7.9 x 7.9" / 200 x 200 x 200 mm |
| Point Distance | 0.17-0.2 mm |
| File Output | OBJ, STL, ASC, PLY |
| Camera Resolution | 1.3 MP |
| Stand-off Distance | 11.4 x 18.9" / 290 x 480 mm |
| Calibration Board | HD |
| Turntable / Load Capacity | 11 lb / 5 kg |
Access & Hazard Information
Assisted Use OnlyMembers are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.
Hazard Class 1- Hazards: Minor injuries that can be resolved with first aid kit or ice pack
- Power: Less than 0.25 HP, 2-4 amps, 120 VAC or up to 18V DC
- Examples: Lower power hand tools and small bench tools. Drills, glue guns, soldering tools, heat guns, 3D printers, 3D scanner
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning.
- Supervision Requirements: The Makerspace must be open and a makerspace staff member must be present in the facility.