Manufacturer:
Do-All
Quantity:
1
Location:
Fundamental Machining Lab
Categories:
Manual Metal WorkPre Processing
Operational
Overview
The DoALL 400S general purpose band saw is a horizontal metal cutting scissor saw. Swiveling 45 degrees, it's the ideal machine for the small to medium fabrication. It is capable of making extremely accurate straight or miter cuts in smaller quantities. The 400S features a 9″ (229mm) high x 16" (406mm) wide capacity of rectangles and 10-3/4″ (273mm) rounds.
Technical Details
Capacity at 90° Rectangle: 9″ x 16″ (229x406mm)
Capacity at 90° Round: 10-3/4″ (273mm)
Capacity at 45° Rectangle: 9″ x 10-3/4″ (229x273mm)
Capacity at 45° Round: 10-3/4″ (273mm)
Recommended Band Type: 1″ x 0.035″ (25x0.89mm)
Maximum Band Length: 158″ (4,013mm)
Band Speed: Variable, 105-275 fpm (32-82mpm)
Band Tension: Spring Loaded by Hand Wheel
Feed Control: Infinitely Variable, Hydraulic
Head: Counter-Balanced
Vise: Manual
Wheels: 14.5″ (368mm) diameter, Cast Iron
Material Pass Line Height: 29-1/8″ (740mm)
Table Capacity: 1800 lbs (816kg)
Access & Hazard Information
Assisted Use OnlyMembers are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.
Hazard Class 4- Hazards: As above, but potential for serious amputations and life-threatening injuries
- Power: As above, but self-standing and 3 phase power
- Examples: Powder actuated tools, table saws, manual mills and lathes
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
- Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.