Manufacturer:
Haas Automation
Quantity:
1
Location:
Main Floor CNC Area
Category:
CNC Machining
Operational
Overview
5-axis CNC machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centers is an effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750 has an integrated dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +110 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity.
Technical Details
Spindle: 30 HP, CAT-40, 12,000 RPM, 90 ft-lbf @ 2000 rpm
Table: 19.6' Integrated 2-Axis Trunnion
Max Weight on Table (evenly distributed): 660 lb
Max Cutting Soeed: 650 ipm
Rapids: 1,200 ipm
Tool Changer: 40+1 Side Mount
Option: Through Spindle Coolant up to 1000 PSI, Through Tool Air Blast
Probing: Work Offset and Tool Offest
Access & Hazard Information
Staff Use OnlyUse of this equipment is reserved for Makerspace staff members only. If a project of yours requires the use of this equipment, speak with a Makerspace staff member.
Hazard Class 4- Hazards: As above, but potential for serious amputations and life-threatening injuries
- Power: As above, but self-standing and 3 phase power
- Examples: Powder actuated tools, table saws, manual mills and lathes
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
- Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.