Overview
Loaded with features, the 31A Sander from Powermatic can tackle the most demanding tasks. Full cast iron construction is great for heavy woodworking. The integral dual dust port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6" x 48" belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45° and 90° and the head lock allows use at any angle in-between. Removing the top guard allows contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.
Technical Details
Disc Diameter (In.): 12"
Disc Speed (RPM): 2,375"
Disc Table Tilt (Deg.): 15 Up, 45 Down
Disc Table Size (L x W) (In.): 17-1/4" x 9"
Sanding Belt Size (L x W) (In.): 48" x 6"
Belt Speed (RPM): 2,410
Belt Table Tilt (Deg.): 45 Down
Belt Table Size (L x W) (In.): 13-1/4" x 7-1/2"
Sanding Arm Locking Positions: 0/45/90
Motor Power (HP): 2 HP
Access & Hazard Information
Assisted Use OnlyMembers are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.
Hazard Class 4- Hazards: As above, but potential for serious amputations and life-threatening injuries
- Power: As above, but self-standing and 3 phase power
- Examples: Powder actuated tools, table saws, manual mills and lathes
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
- Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.