Manufacturer:
Haas Automation
Quantity:
2
Location:
Main Floor CNC Area
Category:
CNC Machining
Operational
Overview
An industry standard compact CNC machining center that is well suited for schools, start-up shops, or as a first step into CNC machining. This machine is loaded with full-size features, such as a 10-station tool changer and tool and work offset automatic probing.
Technical Details
Spindle: 7.5 HP, 6000 RPM, 40 Taper, 33 ft-lbf @ 1200 rpm
Tool Changer: 10 Tool
Probing: Work Offsets and Tool Offsets
Table Work Area: 28.75" x 12" (XY)
Travels: 16.0" x 12.0" x 10.0" (XYZ)
Max Weight on Table (evenly distributed): 500 lb
Max Feedrate (Cutting): 500 ipm
Rapid: 600 ips (XYZ)
Access & Hazard Information
Staff Use OnlyUse of this equipment is reserved for Makerspace staff members only. If a project of yours requires the use of this equipment, speak with a Makerspace staff member.
Hazard Class 4- Hazards: As above, but potential for serious amputations and life-threatening injuries
- Power: As above, but self-standing and 3 phase power
- Examples: Powder actuated tools, table saws, manual mills and lathes
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
- Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.