Manufacturer:
Do-All
Quantity:
1
Location:
Fundamental Machining Lab
Categories:
Pre ProcessingManual Metal Work
Operational
Overview
The DoALL 2013-V3 vertical contour band saw features variable frequency AC inverter drive controls that start the motion of the band wheels slowly to reduce mechanical shock and increase drive train life, plus a dynamic braking function that rapidly stops motion when power is shut-off. The 2013-V3 upright metal cutting band saw is among the most versatile 20" x 13" (508x330mm) sawing machines on the market today.
Technical Details
Band Speed: 30-5,500 fpm (10-1,680mpm)
AC Motor Drive: 3-hp (2.25kW)
Machine Weight (net): 1,250 lbs (567kg)
Throat, Band to Column: 20" (508mm)
Maximum Work Height: 13" (330mm)
Band Width Capacity: 1/8" - 1" (3.2 - 25.4mm)
Band Length: 154" (3,910mm)
Table: 26" x 26" (660 x 660mm) Tilts 45R, 10L
Table to Floor Height: 39" (990mm)
Table Capacity: 500 lbs (227kg)
Upper Wheel Adjustment: 3" (76mm)
Wheels: Aluminum with crowned rubber tires
Access & Hazard Information
Assisted Use OnlyMembers are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.
Hazard Class 4- Hazards: As above, but potential for serious amputations and life-threatening injuries
- Power: As above, but self-standing and 3 phase power
- Examples: Powder actuated tools, table saws, manual mills and lathes
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
- Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.