Manufacturer:
Jet
Quantity:
1
Location:
Fundamental Machining Lab
Category:
Manual Metal Work
Operational
*
*Equipment has not been setup and commissioned. Installation delayed due to construction delays. Target operational date unknown.
Overview
Floor standing manual box and pan brake.
Technical Details
| Machine Type | Floor |
| Bending Length (Inch) | 48 |
| Maximum Mild Steel Capacity (Gauge) | 12 |
| Maximum Depth of Box (Inch) | 4 |
| Press Brake Style | Box & Pan Brake |
| Finger Width (Inch) | 5 at 3; 2 at 4; 5 at 5 |
| Maximum Beam Lift (Inch) | 1-1/2 |
Access & Hazard Information
Assisted Use OnlyMembers are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.
Hazard Class 4- Hazards: As above, but potential for serious amputations and life-threatening injuries
- Power: As above, but self-standing and 3 phase power
- Examples: Powder actuated tools, table saws, manual mills and lathes
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
- Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.