Manufacturer:
Stephen Bader
Quantity:
1
Location:
Fundamental Machining Lab
Category:
Post Processing
Operational
*
*Equipment has not been setup and commissioned.
Overview
Whether you’re hogging off material quickly with a coarse grit belt or putting a fine finish on jet blades, surgical implements, or hand tools, the Bader Space Saver is built with speed and versatility in mind. Change the contact wheel or attachments to process any part quickly and efficiently. It easily pivots on its base, raises to standing height or lowers to your chair.
Technical Details
| Power | 7.5 HP |
| Belt speeds | 1500-9000 SFPM |
| Contact wheel diameter | 9/16” to 18” |
| Contact wheel width | 3” |
| Belt width | 1/4” to 3” |
| Belt length | 132" |
Useful Links
Access & Hazard Information
Assisted Use OnlyMembers are allowed to use this equipment only with dedicated assistance or supervision from a makerspace staff member.
Hazard Class 4- Hazards: As above, but potential for serious amputations and life-threatening injuries
- Power: As above, but self-standing and 3 phase power
- Examples: Powder actuated tools, table saws, manual mills and lathes
- Access Requirements: Members must attend a training session and pass written and hands-on exams. Improper use will be punished with a verbal warning, a note in the members file, mandatory retraining, and potiential loss of access to the space..
- Supervision Requirements: The Makerspace must be open and a dedicated staff member must supervise use of this equipment for the entirety of its operation. Staff may deny access or place additional restrictions on use of this equipment on a per-use or per-person basis.